Comparing the compressive strength of concrete made with sand as fine aggregate and with chipping dust as fine aggregate Department:Civil Engineering By: tunde01 Project ID: 396 Rating: (3.5) votes: 112 Price:₦1000 Get the Complete MaterialAbstractCommon river sand is expensive due to the excessive cost of transportation from natural sources. Also, large-scale depletion of these sources creates environmental problems. As environmental transportation and other constraints make the availability and use of river sand less attractive, a substitute or replacement product for concrete industry needs to be found. River sand is most commonly used fine aggregate in the production of concrete poses the problem of acute shortage in many areas. Whose continued use has started posing serious problems with respect to its availability, cost, and environmental impact. In such a situation the Quarry rock dust can be an economic alternative to the river sand. Quarry Rock Dust can be defined as residue, tailing or other non-voluble waste material after the extraction and processing of rocks to form fine particles less than 4.75mm. Usually, Quarry Rock Dust is used in large scale on the highways as a surface finishing material and also used for manufacturing of hollow blocks and lightweight concrete prefabricated Elements. Use of Quarry rock dust as a fine aggregate in concrete draws serious attention of researchers and investigators. This paper presents the feasibility of the usage of Quarry Rock Dust as hundred percent substitutes for Natural Sand in concrete. Tests were conducted on cubes to study the strength of concrete made of Quarry Rock Dust and the results were compared with the Natural Sand Concrete. An attempt has also been made to durability studies on Quarry Rock Dust when compared with the Natural Sand concrete. It is found that the compressive, flexural strength and Durability Studies of concrete made of Quarry Rock Dust are nearly 10% more than the conventional concrete....Preview Download Preview +Other Civil Engineering project topics and materials you might be interested in»Comparing the compressive strength of concrete made with sand as fine aggregate and with chipping dust as fine aggregate»The comparative study of the compressive strength of concrete made with granite to that made with river round stone (pebble) and local stone»The use of computer in civil engineering»Importance of timber in civil engineering construction»Construction and Installation of a Panel Door»Construction of wardrobe key study on wood work»Effect of street trading on traffic performance and control»Assessment of different types of foundation and their mode of construction»Comparison of soil bearing capacity of different locations in Imo state»Investigation into the suitability of sand and gravel materials commonly used in building construction»Investigating the effect of partial replacement of cement with eggshell powder in concrete production»An investigation in to the causes of cracks in building and possible solutions - a case study of Kukar Gesa community in Katsina metropolis»Determination of the causes, effects of environmental pollution and its possible control within Kwara and Osun state»Suitability of available laterite material in Ilorin East local government area for road construction»Model for prediction of rainfall intensity in Lagos