Home»Civil Engineering» Design and fabrication of triangular notches and a rectangular notch for fluid discharge measurement

Design and fabrication of triangular notches and a rectangular notch for fluid discharge measurement

 Department:Civil Engineering  
 By:usericon SIRJOSEPH  

 Project ID: 7340
 Rating:  (5.0) votes: 1
   Price:₦3000
Abstract
This project focused on the design and fabrication of triangular notches and a rectangular notch for the purpose of measuring the discharge of water over the notches. The rectangular notch and the triangular notches (300, 450,600,900 and 1200) were designed and fabricated with standard specifications and precisions. Discharges over the notches experiments were conducted to investigate the characteristics of flow by the triangular notches and the rectangular notch. The differences in the flow rate of water flowing over the notches were observed. The coefficients of discharge of the fluid flow were determined by computation of the experimental values and compared with the accepted values. The experimental procedures were followed to carry out the experiments. The depths of water were adjusted with different heights and tested by recording the time taken to collect some quantities of water in the measuring tank. The time taken was used later to calculate the flow rate of the notches. Using the empirical equation, data obtained after the experiment were tabulated for the calculation of the discharge coefficients. The calculated discharge coefficients were compared with the standards for triangular notches and rectangular notchs....
Preview +
Other Civil Engineering project topics and materials you might be interested in
»Comparing the compressive strength of concrete made with sand as fine aggregate and with chipping dust as fine aggregate
»The comparative study of the compressive strength of concrete made with granite to that made with river round stone (pebble) and local stone
»The use of computer in civil engineering
»Importance of timber in civil engineering construction
»Construction and Installation of a Panel Door
»Construction of wardrobe key study on wood work
»Effect of street trading on traffic performance and control
»Assessment of different types of foundation and their mode of construction
»Comparison of soil bearing capacity of different locations in Imo state
»Investigation into the suitability of sand and gravel materials commonly used in building construction
»Investigating the effect of partial replacement of cement with eggshell powder in concrete production
»An investigation in to the causes of cracks in building and possible solutions - a case study of Kukar Gesa community in Katsina metropolis
»Determination of the causes, effects of environmental pollution and its possible control within Kwara and Osun state
»Suitability of available laterite material in Ilorin East local government area for road construction
»Model for prediction of rainfall intensity in Lagos

Departments

UPLOAD A PROJECT

Do you have project materials and source code to share? Upload and earn with it.