Construction of a wooden bookshelf Department:Civil Engineering By: Arinze1 Project ID: 5402 Rating: (3.2) votes: 11 Price:₦3000 Get the Complete MaterialAbstractThis project work involves the construction of a bookshelf that is going to be used for storing books and it is being constructed with wood and nail. The wood used for the construction was seasoned mahogany wood that has preservatives and is without defects. During the construction of the bookshelf, both mechanical processes were used to produce a suitable bookshelf. The following are some of the tools and equipment used in the construction which includes hammer or driving the nails, saws for cutting the woods, chisels and mallet for–opening the joints, some of the joints used in the construction includes a vertical and horizontal member of the shelves, Terron joints, butt joints at the top cover member of the shelf and box joint. The bookshelf is provided with a glass door at the front side of it and the frame of the glass has a key for purpose of locking to avoid unwanted persons from having access to anything stored in the bookshelf and the lower side of the bookshelf is constructed in a drawer foremost having keys and handles. The back of the bookshelf is made with plywood and top, down and other components of it are made up of soft and hard wood with different dimensions. The total width of the bookshelf is 1500mm (5ft) and the total light of the bookshop is 2100mm (7ft). ...Preview Download Preview +Other Civil Engineering project topics and materials you might be interested in»Comparing the compressive strength of concrete made with sand as fine aggregate and with chipping dust as fine aggregate»The comparative study of the compressive strength of concrete made with granite to that made with river round stone (pebble) and local stone»The use of computer in civil engineering»Importance of timber in civil engineering construction»Construction and Installation of a Panel Door»Construction of wardrobe key study on wood work»Effect of street trading on traffic performance and control»Assessment of different types of foundation and their mode of construction»Comparison of soil bearing capacity of different locations in Imo state»Investigation into the suitability of sand and gravel materials commonly used in building construction»Investigating the effect of partial replacement of cement with eggshell powder in concrete production»An investigation in to the causes of cracks in building and possible solutions - a case study of Kukar Gesa community in Katsina metropolis»Determination of the causes, effects of environmental pollution and its possible control within Kwara and Osun state»Suitability of available laterite material in Ilorin East local government area for road construction»Model for prediction of rainfall intensity in Lagos